• Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items
Clear Filter

Material

Micron Rating (µ)

Micron Rating (in)

Part Number

Material

CV

Maximum Fitting Pressure

Micron Rating

Price

Add To Cart/Request Quote
N/A Brass N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in $12.95 Add To Cart
Request Quote
N/A Brass N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in $12.95 Add To Cart
Request Quote
N/A Brass N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in $12.95 Add To Cart
Request Quote
N/A Brass N/A 0.09 N/A 100 psig N/A 100 µ0.004 in $12.95 Add To Cart
Request Quote
N/A 303 SS N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in $15.95 Add To Cart
Request Quote
N/A 303 SS N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in $15.95 Add To Cart
Request Quote
N/A 303 SS N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in $15.95 Add To Cart
Request Quote
N/A 303 SS N/A 0.09 N/A 100 psig N/A 100 µ0.004 in $15.95 Add To Cart
Request Quote
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1