E-commerce order processing is temporarily experiencing difficulties and is unable to process orders. Please contact O'Keefe Controls Co. directly to place an order:

E-mail: customerservice@okeefecontrols.com
Phone: 1-800-533-3285 or 203 261-6711
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items
Clear Filter

Material

Micron Rating (µ)

Micron Rating (in)

Part Number

Material

CV

Maximum Fitting Pressure

Micron Rating

N/A Brass N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in
N/A Brass N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in
N/A Brass N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in
N/A Brass N/A 0.09 N/A 100 psig N/A 100 µ0.004 in
N/A 303 SS N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in
N/A 303 SS N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in
N/A 303 SS N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in
N/A 303 SS N/A 0.09 N/A 100 psig N/A 100 µ0.004 in
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1