Print Back
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
OKC-1022_ORTHO
Screened Metal Orifices, Type DSO, Line Drawing
Unit of Measure
1 

Part Number

Material

CV

Maximum Differential Pressure

Micron Rating

Maximum Fitting Pressure

DSO-1-BR N/A Brass N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in N/A 2000 psig
DSO-2-BR N/A Brass N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in N/A 2000 psig
DSO-5-BR N/A Brass N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in N/A 2000 psig
DSO-20-BR N/A Brass N/A 0.09 N/A 100 psig N/A 100 µ0.004 in N/A 2000 psig
GSO-1-BR N/A Brass N/A 0.028 N/A 100 psig N/A 10 µ0.0004 in N/A 2000 psig
GSO-2-BR N/A Brass N/A 0.068 N/A 100 psig N/A 15 µ0.0006 in N/A 2000 psig
GSO-5-BR N/A Brass N/A 0.180 N/A 100 psig N/A 25 µ0.0010 in N/A 2000 psig
GSO-20-BR N/A Brass N/A 0.250 N/A 100 psig N/A 100 µ0.004 in N/A 2000 psig
DSO-1-SS N/A 303 SS N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in N/A 4000 psig
DSO-2-SS N/A 303 SS N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in N/A 4000 psig
DSO-5-SS N/A 303 SS N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in N/A 4000 psig
DSO-20-SS N/A 303 SS N/A 0.09 N/A 100 psig N/A 100 µ0.004 in N/A 4000 psig
GSO-1-SS N/A 303 SS N/A 0.028 N/A 100 psig N/A 10 µ0.0004 in N/A 4000 psig
GSO-2-SS N/A 303 SS N/A 0.068 N/A 100 psig N/A 15 µ0.0006 in N/A 4000 psig
GSO-5-SS N/A 303 SS N/A 0.180 N/A 100 psig N/A 25 µ0.0010 in N/A 4000 psig
GSO-20-SS N/A 303 SS N/A 0.250 N/A 100 psig N/A 100 µ0.004 in N/A 4000 psig
Unit of Measure
1