Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
Request Information Request Quote Add To Cart
Unit of Measure
Items
SS Wire Screen / Orifice Assembly Tube Connector

SS Wire Screen / Orifice Assembly - Tube Connector, Type SLR4
SS Wire Screen / Orifice Assembly Tube Connector

SS Wire Screen / Orifice Assembly - Tube Connector, Type SLR4
SS Wire Screen / Orifice Assembly Tube Connector

SS Wire Screen / Orifice Assembly - Tube Connector, Type SLR4
SS Wire Screen / Orifice Assembly Tube Connector

SS Wire Screen / Orifice Assembly - Tube Connector, Type SLR4
Material N/A 316 SS
CV
N/A 0.009 N/A 0.025 N/A 0.055 N/A 0.09
Maximum Operating Pressure N/A 4000 psig
Maximum Differential Pressure Across Screen N/A 4000 psig
Maximum Pressure Differential N/A 100 psig
Width Across Flats (Hex) N/A 9/16 in
Particle Retention N/A 10 µ0.0004 in N/A 15 µ0.0006 in N/A 25 µ0.0010 in N/A 100 µ0.004 in
Width Across Flats (Hex) 2 N/A 1/2 in
Connection A N/A 1/4" OD Tube Compression
Connection B N/A 1/4" OD Tube