Parametric Search
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
1 - 25 of 28 | Results Per Page | View | Unit of Measure
1 2 
Clear Filter

Filter Rating (in)

Outside Diameter (in)

Connection

Screened

Part Number

Screen Material

Inside Diameter

Outside Diameter

Screened

N/A 304 SS N/A 0 in N/A 0.211 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.211 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.211 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.211 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.254 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.254 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.254 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.254 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.312 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.312 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.312 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.312 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.165 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.165 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.165 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.165 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.375 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.375 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.375 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.375 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.5 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.5 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.5 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.5 in N/A Screened
N/A 304 SS N/A 0 in N/A 0.75 in N/A Screened
1 - 25 of 28 | Results Per Page | View | Unit of Measure
1 2