O’Keefe Controls Co.
O’Keefe Controls Co.
4 Maple Drive
Monroe, CT 06468
Phone: 203.261.6711
Email: info@okeefecontrols.com • Website: www.okeefecontrols.com
Print Back
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
Miniature In-Line Screens 10-32 UNF Adapters
Miniature In-Line Screens - 10-32 UNF Adapters - Line Drawing
Unit of Measure
1 

Part Number

Material

CV

Maximum Fitting Pressure

Micron Rating

FMS-1-BR N/A Brass N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in
FMS-2-BR N/A Brass N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in
FMS-5-BR N/A Brass N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in
FMS-20-BR N/A Brass N/A 0.09 N/A 100 psig N/A 100 µ0.004 in
FMS-1-SS N/A 303 SS N/A 0.009 N/A 100 psig N/A 10 µ0.0004 in
FMS-2-SS N/A 303 SS N/A 0.025 N/A 100 psig N/A 15 µ0.0006 in
FMS-5-SS N/A 303 SS N/A 0.055 N/A 100 psig N/A 25 µ0.0010 in
FMS-20-SS N/A 303 SS N/A 0.09 N/A 100 psig N/A 100 µ0.004 in
Unit of Measure
1