Print Back
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
SS Wire Screens Bound Screens
SS Wire Screens - Bound Screens - Line Drawing
Unit of Measure
Items SS Wire Screens Bound Screens
SSA-1
SS Wire Screens - Bound Screens
SS Wire Screens Bound Screens
SSA-2
SS Wire Screens - Bound Screens
SS Wire Screens Bound Screens
SSA-5
SS Wire Screens - Bound Screens
SS Wire Screens Bound Screens
SSA-20
SS Wire Screens - Bound Screens
SS Wire Screens Bound Screens
SSB-1
SS Wire Screens - Bound Screens
Screen Material N/A 304 SS
Maximum Pressure Drop N/A 100 psig
Micron Rating N/A 10 µm N/A 15 µm N/A 25 µm N/A 100 µm N/A 10 µm
Outside Diameter N/A 0.211 in N/A 0.211 in N/A 0.211 in N/A 0.211 in N/A 0.254 in
Width N/A 0.030 in