Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
| Items |
 FMS-1-BR Miniature In-Line Screens - 10-32 UNF Adapters Price $12.95
|
FMS-2-BR Miniature In-Line Screens - 10-32 UNF Adapters Price $12.95
|
FMS-5-BR Miniature In-Line Screens - 10-32 UNF Adapters Price $12.95
|
FMS-20-BR Miniature In-Line Screens - 10-32 UNF Adapters Price $12.95
|
 FMS-1-SS Miniature In-Line Screens - 10-32 UNF Adapters Price $15.95
|
|||||
| Body Material | Brass | Brass | Brass | Brass | 303 SS | |||||
| Screen Material | 304 SS | |||||||||
| Seal Material | Viton | |||||||||
| Particle Retention (Nominal) | 10 µm | 15 µm | 25 µm | 100 µm | 10 µm | |||||
| Maximum Operating Pressure | 100 psig | |||||||||
| Maximum Pressure Differential | 100 psid | |||||||||
| CV | 0.009 | 0.025 | 0.055 | 0.090 | 0.009 | |||||
| Outside Diameter | 0.312 in | |||||||||
| Connection A | 10-32 UNF Male | |||||||||
| Connection B | 10-32 UNF Female | |||||||||
|
|
||||||||||