Fine screens are used to protect orificesand other critical components from theoccasional particles that enter the fluidduring installation or otherwise. They arenot intended to replace normal filtrationequipment, but rather to augment the protectionof critical components in fluid controlsystems.Four sizes of screen particle retention areoffered; 10, 15, 25 and 100 microns. Thestainless steel wire screens do not introduceloose particles into the fluid stream.The screens are thoroughly cleaned toprevent inadvertent introduction of contaminants.

Related Products to E-4-BR

Related Products to E-5-BR

Related Products to E-6-BR

Related Products to E-7-BR

Related Products to E-8-BR

Related Products to E-9-BR

Related Products to E-10-BR

Related Products to E-11-BR

Related Products to E-12-BR

Related Products to E-13-BR

Related Products to E-14-BR

Related Products to E-15-BR

Related Products to E-16-BR

Unit of Measure

Material

N/A Brass

CV

N/A 0.068

Maximum Pressure Differential

N/A 100 psig

Screen Material

N/A 304 SS

Particle Retention

N/A 15 µ0.0006 in

Maximum Fitting Pressure

N/A 2000 psig

Connection A

N/A 1/4" NPT Male

Connection B

N/A 1/4" NPT Female

Width Across Flats (Hex)

N/A 3/4 in

Total Length

N/A 1.25 in

N/A

    In-line screens are suitable for use with liquids or gases compatible with the materials of construction. The screens protect critical components such as orifices from clogging or reducing flow rate. Applications for in-line screens include protection of:
  • Precision Orifices
  • Pneumatic Transducers
  • Gas and Liquid Flow Instruments
  • Medical Devices
  • Filling and Purging Systems
  • Pneumatic Timers
  • Transmitters
  • Pneumatic Transmission Lines
  • Hydraulic Controls
  • Leak Test Equipment
  • Flow Measurement Devices

Features

N/A
    The in-line screen products are all metal; the screen material is made from fine stainless steel wire.
  • Particle retention size as small as 10 microns
  • Miniature fittings and screens
  • Clean assemblies
  • No loose fibers or particles
  • Long life screen material
  • Well defined flow characteristics
  • Compatible with standard 10-32 and NPT fittings

Features

N/A
    The in-line screen products are all metal; the screen material is made from fine stainless steel wire.
  • Particle retention size as small as 10 microns
  • Miniature fittings and screens
  • Clean assemblies
  • No loose fibers or particles
  • Long life screen material
  • Well defined flow characteristics
  • Compatible with standard 10-32 and NPT fittings