Print Back
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
SS Wire Screens Unbound Screens
SS Wire Screens - Unbound Screens - Line Drawing
Unit of Measure
1 2 

Part Number

Screen Material

Outside Diameter

Micron Rating

XSA-1 N/A 304 SS N/A 0.211 in N/A 10 µm
XSA-2 N/A 304 SS N/A 0.211 in N/A 15 µm
XSA-5 N/A 304 SS N/A 0.211 in N/A 25 µm
XSA-20 N/A 304 SS N/A 0.211 in N/A 100 µm
XSB-1 N/A 304 SS N/A 0.254 in N/A 10 µm
XSB-2 N/A 304 SS N/A 0.254 in N/A 15 µm
XSB-5 N/A 304 SS N/A 0.254 in N/A 25 µm
XSB-20 N/A 304 SS N/A 0.254 in N/A 100 µm
XSC-1 N/A 304 SS N/A 0.312 in N/A 10 µm
XSC-2 N/A 304 SS N/A 0.312 in N/A 15 µm
XSC-5 N/A 304 SS N/A 0.312 in N/A 25 µm
XSC-20 N/A 304 SS N/A 0.312 in N/A 100 µm
XSD-2 N/A 304 SS N/A 0.165 in N/A 15 µm
XSD-5 N/A 304 SS N/A 0.165 in N/A 25 µm
XSD-20 N/A 304 SS N/A 0.165 in N/A 100 µm
XSF-1 N/A 304 SS N/A 3/8 in N/A 10 µm
XSF-2 N/A 304 SS N/A 3/8 in N/A 15 µm
XSF-5 N/A 304 SS N/A 3/8 in N/A 25 µm
XSF-20 N/A 304 SS N/A 3/8 in N/A 100 µm
XSG-1 N/A 304 SS N/A 0.50 in N/A 10 µm
XSG-2 N/A 304 SS N/A 0.50 in N/A 15 µm
XSG-5 N/A 304 SS N/A 0.50 in N/A 25 µm
XSG-20 N/A 304 SS N/A 0.50 in N/A 100 µm
XSH-1 N/A 304 SS N/A 0.75 in N/A 10 µm
XSH-2 N/A 304 SS N/A 0.75 in N/A 15 µm
Unit of Measure
1 2