O’Keefe Controls Co.
O’Keefe Controls Co.
4 Maple Drive
Monroe, CT 06468
Phone: 203.261.6711
Email: info@okeefecontrols.com • Website: www.okeefecontrols.com
Print Back
    Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
Unit of Measure

Specifications

Material

 N/A 303 SS

CV

 N/A 0.009

Maximum Operating Pressure

 N/A 100 psig

Maximum Pressure Differential

 N/A 100 psig

Screen Material

 N/A 304 SS

Seal Material

 N/A Viton

Micron Rating

 N/A 10 µ0.0004 in

Maximum Differential Pressure Across Screen

 N/A 4000 psig

Connection A

 N/A 10-32 UNF Male

Connection B

 N/A 10-32 UNF Female

Screened

 N/A Screened

Dimensions

Outside Diameter

 N/A 0.312 in

Application

N/A

    In-line screens are suitable for use with liquids or gases compatible with the materials of construction. The screens protect critical components such as orifices from clogging or reducing flow rate. Applications for in-line screens include protection of:
  • Precision Orifices
  • Pneumatic Transducers
  • Gas and Liquid Flow Instruments
  • Medical Devices
  • Filling and Purging Systems
  • Pneumatic Timers
  • Transmitters
  • Pneumatic Transmission Lines
  • Hydraulic Controls
  • Leak Test Equipment
  • Flow Measurement Devices

Features

Features

 N/A
    The in-line screen products are all metal; the screen material is made from fine stainless steel wire.
  • Particle retention size as small as 10 microns
  • Miniature fittings and screens
  • Clean assemblies
  • No loose fibers or particles
  • Long life screen material
  • Well defined flow characteristics
  • Compatible with standard 10-32 and NPT fittings

Features

 N/A
    The in-line screen products are all metal; the screen material is made from fine stainless steel wire.
  • Particle retention size as small as 10 microns
  • Miniature fittings and screens
  • Clean assemblies
  • No loose fibers or particles
  • Long life screen material
  • Well defined flow characteristics
  • Compatible with standard 10-32 and NPT fittings