Fine screens are used to protect orifices and other critical components from the occasional particles that enter the fluid during installation or otherwise. They are not intended to replace normal filtration equipment, but rather to augment the protection of critical components in fluid control systems. Four sizes of screen particle retention are offered; 10, 15, 25 and 100 microns. The stainless steel wire screens do not introduce loose particles into the fluid stream. The screens are thoroughly cleaned to prevent inadvertent introduction of contaminants.
Request Information Request Quote Add To Cart
Unit of Measure
Items
Miniature In-Line Screens 10-32 UNF Adapters

Miniature In-Line Screens - 10-32 UNF Adapters
Miniature In-Line Screens 10-32 UNF Adapters

Miniature In-Line Screens - 10-32 UNF Adapters
Miniature In-Line Screens 10-32 UNF Adapters

Miniature In-Line Screens - 10-32 UNF Adapters
Miniature In-Line Screens 10-32 UNF Adapters

Miniature In-Line Screens - 10-32 UNF Adapters
Miniature In-Line Screens 10-32 UNF Adapters

Miniature In-Line Screens - 10-32 UNF Adapters
Material N/A Brass N/A Brass N/A Brass N/A Brass N/A 303 SS
CV
N/A 0.009 N/A 0.025 N/A 0.055 N/A 0.09 N/A 0.009
Maximum Operating Pressure N/A 100 psig
Maximum Pressure Differential N/A 100 psig
Screen Material N/A 304 SS
Seal Material N/A Viton
Outside Diameter N/A 0.312 in
Particle Retention N/A 10 µ0.0004 in N/A 15 µ0.0006 in N/A 25 µ0.0010 in N/A 100 µ0.004 in N/A 10 µ0.0004 in
Maximum Differential Pressure Across Screen N/A 2000 psig N/A 2000 psig N/A 2000 psig N/A 2000 psig N/A 4000 psig
Connection A N/A 10-32 UNF Male
Connection B N/A 10-32 UNF Female