This panel controls a liquid level within the deadband of a single pneumatic float valve. It can be configured for pump-up or pump-down control when used in conjunction with a normally closed pneumatic float valve (pump down) or a normally open pneumatic float valve (pump up). The dead-band of the pneumatic float valve is approximately ¼” – ½”.
Unit of Measure
Description |
N/A Includes inlet filter, regulator and gage assembly |
Operation |
N/A A pneumatic control panel |
Box Dimensions |
N/A 4 x 4 x 2-5/8 in |
Inlet Air Pressure to Regulator |
N/A 50 to 125 psig |
Normal Pressure Setting |
N/A 50 to 100 psig |
Pneumatic Indicator |
N/A 1 in diameter red/green |
Manual Control |
N/A OFF/ON Toggle Valve |
Air Filtration |
N/A Air should be dry and filtered to 5 microns |
Output Air Signal |
N/A 50-100 psig (same as regulator pressure setting) |
Output Signal |
N/A 50-100 psig (same as regulator pressure setting) |
Control Action |
N/A OFF/ON Toggle Valve |
Minimum Input Pressure |
N/A 50 psig |
Maximum Input Pressure |
N/A 125 psig |
Minimum Operating Pressure |
N/A 50 psig |
Maximum Operating Pressure |
N/A 100 psig |
Operation |
N/A A pneumatic control panel |
Connection A |
N/A 5/32" OD Tube Push-Lock |
