The Precision Micro-Orifices® are constructedof brass or stainless steel withorifice sizes from .0003" to .005" diameter.The orifices are used to accurately metervery low flow rates of gases or liquids.Optional stainless steel screens are availableto protect the tiny orifices from minutecontamination particles.
Unit of Measure

Seal Material

N/A Viton

Material

N/A 303 SS

Nominal Orifice Size

N/A 2E

CV

N/A 0.0001300

Maximum Operating Pressure

N/A 100 psig

Inlet Type

N/A Straight Thread

Connection A

N/A 10-32 UNF Male

N/A

  • Precision metering of very low flow rates – gases or liquids
  • Standard for flow or leak rates
  • Accurate Timing in Pneumatic or Hydraulic Circuits
  • Flow limiting

Orifice Diameter

N/A 0.0025 in

Width Across Flats (Hex)

N/A 1/4 in

Total Length

N/A 0.335 in

Air Flow at Pressure - Standard Cu. Cm. Per Minute (SCCM)

N/A 5 psig: 33.8 cm³/min 10 psig: 49.4 cm³/min 15 psig: 62.6 cm³/min 20 psig: 74.5 cm³/min 25 psig: 86.0 cm³/min 30 psig: 97.3 cm³/min 40 psig: 123 cm³/min 50 psig: 146 cm³/min 60 psig: 169 cm³/min 70 psig: 192 cm³/min 80 psig: 215 cm³/min 90 psig: 241 cm³/min 100 psig: 269 cm³/min

Flow Accuracy at Pressure - Standard Cu. Cm. Per Minute (SCCM)

N/A 25 psig: ± 6 cm³/min